Compute Module • Re: Flashing CM4 eMMC via I/O board slow. Advice?
Hi ,Regarding ethernet setup, yes that is all correct. And as I mentioned, using a stock image that is compressed from the RPi website works ok, so I think the setup is OK. FYI: I tried adding...
View ArticleAdvanced users • Re: Raspberry Pi 5 USB Gadget mode for MIDI
Ah, yes, you are correct!Then I don't know how to connect it without a USB-C split PD cable (which I don't have).My setup is: a Mac Mini (with USB-C and USB3/2 ports) that I need to use as a host, and...
View ArticleBeginners • Re: What's the best 1TB SSD in terms of Value to every dollar i...
It hardly matters. Anyway, is this a Raspberry Pi question?Statistics: Posted by jamesh — Mon Jul 29, 2024 3:10 pm
View ArticleClik here to view.
Networking and servers • Re: My First Home Server
I would look to use Docker Compose files - these are often posted by the container creators and easier to step through and understand what is being set up. They are easier to use than the command line...
View ArticleAndroid • Re: Can I watch the Netflix contents installing Android on the...
Hello.I tried to write the imge "lineage-21.0-20240618-UNOFFICIAL-KonstaKANG-rpi4-atv-ota.zip" to the sd card using the raspberry pi imager,as suggested by the instructions,but it failed with the...
View ArticleBeginners • Re: Which one to download deb or rpm?
it's generally safer to go with the version that's in the repository.The newer one is in 'the' repo (Debian, which is the basis for PiOS 64)If the pi repo version would still be relevant for PiOS it...
View ArticleGraphics, sound and multimedia • Re: No interlaced HDMI output in Pi4 Bookworm
Hi,I am using a headless pi (no desktop, only CLI).If I try with 'modetest -s 32:1920x1080i-25', I get an interlaced output. However the framebuffer is still showing in...
View ArticleTroubleshooting • Re: Two RPi 5 dead
Ok, many comments here but so far I haven't got much further in my understanding of the problem.@Jamesh, thank you for your comment but if it is just the I2C communication with the PMIC that fails I...
View ArticleGraphics, sound and multimedia • Multichannel 7.1 audio over HDMI
Hi,I am trying to get 7.1 multichannel audio through HDMI with no luck. I am using a Pi4 with bookworm.Is there any special config in ALSA or PULSE that I need to implement?What I've noticed is that...
View ArticleTroubleshooting • USB audio interface noise 20dB louder when connected to Pi4
I've got a USB audio interface (Hotone Jogg) connected to a Raspberry Pi 4 and it has significantly more input noise than when it is connected to my Windows PC.Recording input from both sources shows...
View ArticleMicroPython • Re: How to receive large (>1024 byte) UDP datagram packets?
but it then stops reporting packets received after some timeRight - now that I send larger amounts, I see the same problem. In fact, if I send 32 KB in sizes of 1460, it stops receiving after two...
View ArticleCamera board • Re: Cropping camera input and memory usage
Is there any likelihood of generic cropping being implemented for other camera modules?Or does it depend on a hardware feature only found in this camera module?It depends on how the sensor readout is...
View ArticleBeginners • Re: How to send two camera streams from RPi 5 over TCP connection...
There are many ways to go about this, so I'm slightly hesitant to make a suggestion. You could certainly put a "capture_array()" in a loop where you could (compress?) and send the frames. The outline...
View ArticleMedia centres • Re: Peppy player
Do you use a Bluetooth? Only 'player' volume control type is available for Bluetooth. If you don't use it make sure that the property 'bluetooth' is set to...
View ArticleCompute Module • Re: Linux Reboot fail
What carrier board are you using?That sounds like an issue of the SD card not switching back from 1.8V to 3.3V mode over the reboot. See section 2.11 of https://datasheets.raspberrypi.com/cm4/ ......
View ArticleRaspberry Pi Connect • Pi Connect in an iFrame
Hi, We have a content management application written in flutter and its super useful to curate specific web pages for our engineers.We want to give them access to our RPi devices but do it within the...
View ArticleAdvanced users • Re: Boot Bullseye, Buster, or Stretch on a Raspberry Pi 5 :...
Well after doing some digging around and testing I found out that the only problem is related to the GPU not working properly maybe because of firmware instruction or hardware change I also noticed...
View ArticleAdvanced users • Re: 3 monitors possible with RaPi5?
I may regret this but what is your use case for 3 monitors, that you think a Pi 5 can drive? As soon as I hear multimonitor I think coding (fine) call center (likely fine) or gaming (Huston we have a...
View ArticleClik here to view.
HATs and other add-ons • Re: AI Kit - How to use GPIOs?
So basically the gpio's are unusable with the AI kit parts as sold... Unless I'm missing something obvious. Statistics: Posted by FinalCatch — Wed Jul 31, 2024 3:08 pm
View ArticleAutomation, sensing and robotics • Re: How to analysis data from thermal images
What sort of analysis do you want to do?You've mentioned numpy which will work well with matrices of data, I'd also consider OpenCV for which there are lots of example and tutorials. It is designed...
View Article