Troubleshooting • X1001 NVMe freeze on boot RPI5
I have followed the guide to boot from NVMe and updated the eeprom. The SSD I am trying to boot from is :SK hynix PC300 NVMe 256GB When I boot from it, I can see the desktop and I am able to briefly...
View ArticleTroubleshooting • Re: pi-gen to generate a Bookworm image with X11 as default
Certainly tdewey,With the Bullseye distribution on Raspberry Pi I used these few customizations (with Bookworm they don't seem to work perhaps due to the configuration files having changed names or...
View ArticleGraphics, sound and multimedia • Re: PiGRRL 2 with 3.5 inch display upgrade
The Adafruit 2.8-inch PiTFT is an SPI display.Stick with an SPI display as they require 4 GPIOs from the Pi, rather than the 20-28 GPIOs that a DPI display requires. If you don't then there will be...
View ArticleMedia centres • Re: TV HAT Raspberry Pi 5
There is a candidate fix available from rpi-update - run:Code: sudo rpi-update pulls/6280and reboot. Note that this is quite an invasive set of changes to make DMA on RP1 go faster, and while I've...
View ArticleTroubleshooting • Re: Pi 5 Stopped booting
I would love to know why cables that work fine on Pi 4's don't work on a Pi 5? I assumed that the only difference is in how well they are made.The "display:" line from the diagnostics display shows...
View ArticleOff topic discussion • Re: Has the Crowdstrike global outage affected any key...
Unless of course Crowdstrike's update mechanism prevents that.That does appear to be the case; CrowdStrike pulled the release trigger and it was all over at that point.The "not Microsoft's fault"...
View ArticleOff topic discussion • Re: What flat button should I use?
Sigh. Replying to your posts has always been hard work for everybody.Is that a good thing?Anyway, thanks for the help everybody!Statistics: Posted by Henrik Gill — Wed Jul 24, 2024 1:28 pm
View ArticleBeginners • Re: Any way to use AI to identify a cat versus a raccoon?
Sadly; so much useful technology; also has some less than savoury applications.All too true and all but unavoidable. The only thing we can do is discourage, limit and regulate those unsavoury...
View ArticleCamera board • Enable UART breaks IMX462
Hello everyone,I've been working through an issue with an Arducam IMX462 alongside Arducam Support. I am working on integrating this camera in a BlueROV2 but have replicated the issue on plain...
View ArticlePython • Re: Runtime error waiting_for_edge GPIO
Please hippy, do tell more! (Interested)I would rather not solder and hack my way to installing pull up/dn 10k resistors in the hardware itself to regain functionality.Statistics: Posted by LPSeg13 —...
View ArticleRaspberry Pi OS • Re: Wifi broken on 64-bit image after all 2022-04 releases...
No typo. Looks like mods didn't like the whole thread and either obliterated or hid it.See here: https://github.com/raspberrypi/bookworm ... 2245126896 and you only need the feature_disable, not the...
View ArticleClik here to view.
Interfacing (DSI, CSI, I2C, etc.) • Re: Raspberry 5 issue that did not exist...
On a pi5, create a venv (with --system-site-packages) and activate it.Code: pip install rpi-lgpioThe blink example with "import RPi.GPIO as GPIO" then works perfectly.Works on latest PI5 with latest...
View ArticleGraphics, sound and multimedia • Re: Help with logarithmic potentiometer
You may also want to think whether or not you have the GND and 3.3V in the correct order. If they were linear potentiometers it would not matter, but for logarithmic ones it does. With the slider in...
View ArticleClik here to view.
Troubleshooting • PI 5 not booting from HDD after power failure
Relatively new to PI so please pardon for basic questions. I set up my Pi 5 about two months ago with Plex, Teslamate and CasaOS, Was booting off a 512mb SSD with no sd card. We had a power failure...
View ArticleHATs and other add-ons • Re: TV Hat reliability
Cross-posting from the other thread, as there may be different people subscribed to this one:viewtopic.php?t=359876&start=25#p2239044There is a candidate fix in rpi-update for this issue. Closing...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Raspberry Pi 4B mounted to the...
Thank you for the helpful feedback and the test trial as well to confirm, I'm still relatively new in the world of Pi/Linux, so any insights are appreciated. I'm using a Debian Bullseye OS, and...
View ArticleAdvanced users • Re: Rpi5 stucks on solid red led after boot with a camera...
I use a standard FPC 22 pin flat cable.One of these? https://www.raspberrypi.com/products/camera-cable/I think you have a problem with the hardware of the camera assembly, and you are unlikely to get...
View ArticleAdvanced users • Re: How do I revert kernel 6.6.28--> 6.6.16 offline?
Why offline? Can't you use the onboard WiFi for the update?it's damagedStatistics: Posted by twostarl — Thu Jul 25, 2024 2:29 pm
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: VVX10F034N00 LCD with CM4
Thanks, but I already looked this up and don't have access to the paid datasheet. Is there a way to access/pay without the countless information required to create an account?Statistics: Posted by...
View ArticleGeneral discussion • Setting data rate in config register of ads1115 using...
Hello,while trying to set the configuration register of the ADS1115,when smbus2 library is used:from smbus2 import SMBusimport timewith SMBus(1) as bus: data = 0b0100001010000100 #config = data |...
View Article