General discussion • Re: Lecroy HDO6104 oscilloscope with pyvisa
https://github.com/pyvisa/pyvisa-py/issuesStatistics: Posted by memjr — Fri May 31, 2024 12:32 am
View ArticleTroubleshooting • Re: bullseye nano not binding arrow
Thx for the suggestions so far. But keep in mind that the arrows work perfectly for all other Raspberry Pis BEFORE version 4. I can literally open 2 Putty sessions - one from the Raspberry Pi 4 and...
View ArticleTroubleshooting • Re: Pi 5 with latest Pi OS desktop. NVMe SSD in RTL9210 USB...
Some experiments with boot up. I was going to use the Pi to copy all the files from a full 2 TB SSD to an empty 4 TB magnetic disk. When both disks were in before switching on the Pi, the magnetic...
View ArticleTroubleshooting • Re: Raspberry pi 400 has dark screen after boot.
we tried to boot up without SD card, screen still doesn't show anything.Statistics: Posted by ciciewang — Fri May 31, 2024 1:08 am
View ArticleGeneral discussion • Re: Raspberry Pi 5 discussion thread
I can't be the only person considering bricking this Pi 5 and ordering a 4?Why? plenty of use cases for Pi5, I use it as a Desktop PC, much better than the Pi4.$6 USB sound dongle worked out of...
View ArticleAdvanced users • Re: custom image for RaspberryPi 5
Nice to know Buildroot can build Pi5 images now.Statistics: Posted by Gavinmc42 — Fri May 31, 2024 1:28 am
View ArticleCamera board • Re: How do I control Pin 12 on the camera bus?
Which Pi are you using? As none of the camera modules since v1 have had an LED, the GPIO driving that line has been dropped from Pi4, Pi02W, and CM4IO.Due to this there is no configuration defined in...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Connecting single relay to trigger
http://www.hiletgo.com/ProductDetail/1958599.htmlThis is the product page from the manufacturer.I bought it on Amazon though. Just a basic Chinese 5V relay.Statistics: Posted by testing8 — Fri May 31,...
View ArticleAutomation, sensing and robotics • Reliable Tilt Switch
Hello,Working on a raspi project with a tilt switch.Need a simple on/off switch for when the project is tilted past about 45 degrees. (Only in one direction)Will power the NC or NO switch off of the...
View ArticleHATs and other add-ons • Re: Longer Flexcables for the M.2 HAT+
i got the x1001 and grabbed a set of extra from amazonhttps://www.amazon.com/gp/product/B0CXC ... UTF8&psc=1Those aren't suitable for OP. The Raspberry Pi M.2 HAT needs an opposite-side contacts...
View ArticleTroubleshooting • Is it 32-bit or 64-bit?
I have a Raspberry Pi 3B+ rev 1.2 (2014), no physical WLAN or Bluetooth module on it.It was my understanding that this was 64-bit arch, but as I can't get it to boot 64-bit Rasparian/Lite, I put...
View ArticleSDK • Re: How to set NO_SYS to 0
You should not be using “pcio_cyW43_arch_none” along with the the other libraries;It is an alternative to the other Pico_cyw43_arch librariesStatistics: Posted by kilograham — Sat Jun 01, 2024 12:36 am
View ArticleTroubleshooting • Re: Rpi3B+ won't boot from same card as Rpi3B, latest image...
I think I solved it - this board may be a knockoff (I got it in 2014, there's no wifi or bluetooth modem on it)3B +:Code: pi@octopi:~ $ cat /proc/cpuinfoprocessor : 0model name : ARMv6-compatible...
View ArticleTroubleshooting • Re: Is it 32-bit or 64-bit?
As the last line shows, you have a Raspberry Pi Model B+, i.e. a Raspberry Pi 1B+, not a 3B+. You also said it was from 2014 and the 3B+ wasn't released until 2018.The Pi1 is 32-bit only (and Armv6 at...
View ArticleCamera board • Re: Unable to connect imx585 camera using raspberry pi 4
Reading https://cine-fox.github.io/starlightEye.html it also says Just FYI that that webpage is not own by me, the owner of the website cloned my Github page here...
View ArticleAutomation, sensing and robotics • Re: Reliable Tilt Switch
Are you sure it's not a software issue?Also, I recommend connecting your switch between GPIO and GND, and either adding a pull-up resistor to 3.3V, or turning on the built-in pull-up.Tilt switches are...
View ArticleGeneral discussion • Re: Raspberry Pi 5 on a 4K Monitor
Thank you for reminding me of the Appearance Settings option to set defaults for large screens. That helped a lot. I also set the font size in terminal to 18, and set the zoom in chrome to 150%. With...
View ArticleTroubleshooting • Rpi 3B+ shows only one CPU and no modem?
I have a 3B+ rev 1.2 from 2014 I think it might be a knockoff.It shows no modem and only one cpu - has anyone seen this before?Code: mofo@BOOTY:~ $ cat /proc/cpuinfoprocessor : 0model name :...
View ArticleTroubleshooting • Re: Rpi 3B+ shows only one CPU and no modem?
that's not a 3b, there's no 3 before the bModel : Raspberry Pi Model B Plus Rev 1.2Statistics: Posted by kerry_s — Sat Jun 01, 2024 1:59 am
View ArticleTroubleshooting • Re: Raspberry Pi 4b dead???
I used a onn battery connected to the usb-c jack. It gave 5vStatistics: Posted by nevaang — Sun Jun 02, 2024 12:08 am
View Article