Troubleshooting • Re: cant get booting from NVMe to work
@thagrol Thank you, your answer was helpful and pointed me into the right direction over the past few days.@memjrAfter resolving booting order, i have performed same order of steps with nothing to...
View ArticleTroubleshooting • Re: [SOLVED] dmesg : "raspberrypi-firmware...
Well. As it happens (as it was supposed to happen), few minutes after I marked this as closed, the error re-appeared after ~5 days. Truth being told, the GPU at that time was heavily hammered with...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: RPI 5 GPIO serious timing issues
Write-then-read will ensure that the writes are flushed to the hardware, but if you're batching e.g. 8 bits at a time then you may get delays between batches.Statistics: Posted by jdb — Sun Mar 03,...
View ArticleClik here to view.
Raspberry Pi OS • Re: Raspberry Pi updates
In the spirit of education that spawned the Pi in the first place; maybe there should be a special thread on here where the "old timers" can share amusing anecdotes of their past mistakes...as a...
View ArticleGeneral discussion • RPI Button Code
I am buying a button to attach to my RPI and I want it to run 1 python script when button is held down and 1 python script when button is let go. What should I do?Statistics: Posted by Henrik Gill —...
View ArticleCamera board • Re: Pi camera on bookworm and bullseye
Is camera support for bookworm planned or are RPi cameras essentially discontinued beyond bullseye?The closed source Legacy camera stack is not going to be supported from Bookworm onwards.Full support...
View ArticleCamera board • Camera is not able to click the images
I am currently running the python script on Raspberry Pi 4 Model B Rev 1.2 and i have enabled the camera legacy in raspi configurationand the python script is:from time import sleepfrom datetime...
View ArticleGeneral discussion • Re: Raspberry Pi 4 model B issues
Have you tried following the not booting sticky?Statistics: Posted by wildfire — Sun Mar 03, 2024 2:24 pm
View ArticleGeneral discussion • Re: RPI Button Code
I am buying a button to attach to my RPI and I want it to run 1 python script when button is held down and 1 python script when button is let go. What should I do?You should certainly search before...
View ArticleGraphics, sound and multimedia • Re: Which Method Do You Use To Get Sound...
Are there any DACs available for the pi5 yet?When I bought the Argon ONE V3, they are planning to release an addon DAC board. Still heard no details - they suggested sometime in MarchStatistics:...
View ArticleCamera board • Re: IR cut, how do I use it?
It's 2 wire's on a plugWhat do I need to do to activate it?I assume we apply a voltage to it but what voltage?Just connect it to a pin and set high to activate it?Can't say if they're the same, but...
View ArticleCamera board • Re: Camera is not able to click the images
Are you running Raspberry Pi OS with desktop (64-bit) Bookworm or something else (Bullseye) etc.?How to tell: Code: cat /etc/os-releaseStatistics: Posted by neilgl — Sun Mar 03, 2024 2:51 pm
View ArticleTroubleshooting • Re: Init.d/dhcpcd does not exist
Very new to pi. Trying to follow this tutorial: https://josh.fail/2019/deluge-and-openv ... erry-pi-4/, and came to a roadblock. Code: sudo /etc/init.d/dhcpcd restartcat /etc/resolv.confI don't have a...
View ArticleTroubleshooting • Re: Pi3 A+ only booting PiOS - strange error on anything else
I tried the suggestions in the sticky post but did not get much further.I used SD Card Formater to format the cards (overwrite format on Mac). I then used Rasperry Pi Imager to test different distros....
View ArticleOther projects • Re: Need suggestions for materials
For an infrared camera I would go for the camera module V3 NOIR, see camera hardware https://www.raspberrypi.com/documentat ... les[b][/b]For the other materials, I would get inspiration from these...
View ArticleNetworking and servers • Re: wpa_supplicant.conf settings
By default Bookworm uses NetworkManager which does not use the wpa_supplicant.conf file.Use the tui tool instead:Code: sudo nmtuiStatistics: Posted by klricks — Mon Mar 04, 2024 2:39 pm
View ArticleGeneral discussion • Re: rpi-update
Please don't use rpi-update unless asked to by a Pi engineer. It loads pre-release software with no guarantee it will work.Just use the following which gets release software and firmware.sudo apt...
View ArticleGeneral • Re: How long will the Raspberry Pi Pico be turned on using a single...
You can reduce core voltage down to 0.90 V and frequency accordingly (at 0.90 V there might not be a problem to run it at 133 MHz, but depends on silicon lottery):Code: #include...
View ArticleClik here to view.
Camera board • Re: 4 cameras on a Pi5 CSI MIPI lanes, what do you need to to...
Arducam make switches but this site says Bullseye only so not pi5...https://docs.arducam.com/Raspberry-Pi-C ... ter-Board/Hi Gordon,This Multiplexer is compatible with ov5647/imx219/imx477/imx708 on...
View ArticleDevice Tree • Re: Can a rotary encoder generate keyboard events?
Yes, I also found this.Sadly, it does not seem to work and the repo has been untouched for ~5 years now, so I don't expect there to be a fix.The installation completes and I can load the built module,...
View Article