Camera board • Re: rpi5 with imx219, no camera available on interface cam/disp 0, interface cam/disp 1 is working correct

As you may have read in my post, it does not work with "camera_auto_detect=0" in config.txt.

Pardon? What's that got to do with anything?

"dtoverlay=imx219" will enable an imx219 camera connected to CAM/DISP1.
"dtoverlay=imx219,cam0" will enable an imx219 camera connected to CAM/DISP0.

"camera_auto_detect=1" will attempt to detect any attached genuine Raspberry Pi camera modules(*).
Mixing it with manually configuring overlays can cause further configuration issues, so use one or the other, not both.


(*) 3rd party modules will not be auto detected, other than clones of the v1 ov5647 module.

Statistics: Posted by 6by9 — Tue Jul 23, 2024 1:37 pm

---